Appliance Repair
Oven, Range & Cooktop Repair Across San Diego and Orange County
When the oven won't hold temperature the night before a dinner party, or a gas burner clicks but never lights, you need someone who knows the difference between a tired igniter and a failed safety valve, not a parts-swapping guess. Escondido Appliance Repair fixes gas, electric, dual-fuel, and induction cooking appliances every day across San Diego County and Orange County, from slide-in ranges in Carlsbad and Oceanside to pro-style 36-inch and 48-inch ranges in Rancho Santa Fe, Newport Coast, and the hills above Escondido.
Cooking appliances run hotter and cycle more often than almost anything else in the kitchen, so bake elements crack, hot-surface igniters weaken, spark electrodes carbon up, and control boards take a beating from heat and grease over the years. Our technicians arrive with the meters and common parts to test the heating circuit, the temperature sensor, the spark module, and the relay board on the first visit, then give you a flat, upfront price before any work begins.
Every job is backed by a 90-day warranty on parts and labor, and the $89 on-site diagnostic is waived when you go ahead with the repair. We repair daily from 8:00 AM to 6:00 PM and answer the phone 24/7, so a cold oven never has to wait until morning.
Direct answers
Oven & range repair — quick answers
-
Why does my gas oven igniter glow but the burner never lights?
A glowing igniter that never lights the burner usually means a weak hot-surface igniter that no longer draws enough current to open the safety gas valve. Escondido Appliance Repair measures the igniter's amperage against spec and fits the correct unit, with a 90-day warranty. Call (858) 377-6959.
-
Is it worth repairing a built-in Wolf or Thermador range or should I replace it?
Repairing a pro-style built-in range is usually worth it, since high-end Wolf, Thermador, Sub-Zero, Viking, Miele, and Dacor units cost far more to replace. Escondido Appliance Repair uses factory-trained, insured technicians on these brands, gives a flat upfront price after inspection, and backs work with a 90-day warranty.
-
How much does it cost to fix an oven that won't hold temperature?
Oven repairs start around $149, with a flat, upfront price quoted after inspection. Uneven heat or temperature drift usually traces to an out-of-spec sensor or worn thermostat. The $89 on-site diagnostic is waived when you proceed with the repair, and all work carries a 90-day parts-and-labor warranty.
Common faults we fix
-
Weak or failed oven igniter (gas)
On most gas ovens the hot-surface igniter has to glow hot enough to draw the current that opens the safety gas valve. As it ages it weakens, so you hear gas hissing and the igniter glowing but the burner never lights, or preheat drags on for 20-plus minutes. We measure the igniter's amperage draw against spec and fit the correct hot-surface or spark unit so the valve opens reliably.
-
Burned-out bake or broil element (electric)
An electric oven that won't heat, heats only on broil, or shows blistering and a visible break in the element loop usually has a failed heating element. We confirm continuity, check the element terminals and wiring for arcing or burn-through behind the rear panel, and install a matched bake or broil element so the oven recovers full, even heat.
-
Out-of-spec temperature sensor or thermostat
Uneven baking, food scorching on top, or a reading that drifts well off the setpoint usually traces to an oven sensor reading out of range or a worn gas thermostat feeding the control the wrong signal. We test the sensor's resistance against the factory ohm chart and replace it, then set the oven's temperature offset so it holds the number on the display.
-
Failed relay board or membrane touch panel
When the display goes dark, throws an F-code, won't accept settings, or the oven powers up but never calls for heat, the electronic relay board or the touch panel is a common culprit. We test the bake and broil relays and the board's power circuit before replacing anything, so you aren't paying for a board that wasn't the real fault.
-
Induction cooktop not detecting pans or shutting off
Induction tops that won't recognize a pan, drop power at random, throw an E or F code, or shut down mid-cook usually point to a failed inverter power module, a cooling-fan fault, or a cracked surface temperature sensor. We test the inverter board and the pan-detection circuit and source the matching module so every zone responds and holds its power level.
-
Surface burner won't light or clicks constantly
A gas cooktop burner that clicks nonstop, won't spark, or burns yellow and uneven is often a clogged burner port, a cracked spark electrode, a misseated burner cap, or a shorted spark switch under the knob. We clear and align the ports and cap, test the spark module and switches, and restore a clean, steady blue flame on every burner.
Oven interior — before & after
Tell-tale symptoms
- Oven won't heat or preheat
- Gas burner clicks but won't light
- Bakes hot, cold, or unevenly
- Induction zone not detecting pans
- Control panel dark or showing an F-code
- Broiler works but bake won't
- Oven won't hold its set temperature
- Cooktop burner clicking nonstop
- Smell of gas near the range
We repair gas, electric, dual-fuel, and induction cooking appliances from Samsung, LG, Bosch, Whirlpool, GE, Cafe, KitchenAid, Maytag, and Frigidaire, plus pro-style ranges and cooktops from Wolf, Viking, Thermador, Dacor, and Miele.
FAQ
Oven & range repair — questions
How much does oven or range repair cost?
Oven, range, and cooktop repairs typically start from around $149, but that's indicative only. Every visit begins with an $89 on-site diagnostic, after which your technician gives a flat, upfront quote before any work starts. The $89 is waived when you proceed with the repair, and the final price depends on the fault and the brand.
Can you fix my oven the same day?
Usually, yes. We carry common igniters, bake and broil elements, and oven sensors on the van, so many gas and electric oven repairs across San Diego and Orange County are finished on the first visit. Book early for the widest choice of arrival windows, or call (858) 377-6959 any time, day or night, to check the next available slot.
Is it worth repairing my oven or should I replace it?
If your range is under about 10 to 12 years old, repair is almost always the smarter choice, since a single failed igniter, element, or sensor costs a fraction of a new appliance. For high-end gas and pro-style ranges, repair makes sense even longer. Your technician will tell you honestly after the diagnostic if a unit isn't worth fixing.
Do you repair gas, electric, and induction cooktops?
Yes. Our technicians service all three: gas ranges and cooktops, electric coil and radiant tops, and induction surfaces with their inverter and pan-detection systems. Gas work is handled safely with a full leak check and a test of the safety valve before we leave.
Are parts and labor guaranteed?
Yes. Every oven, range, and cooktop repair is backed by our 90-day warranty on both parts and labor. We fit brand-appropriate replacement parts for Samsung, LG, Bosch, Whirlpool, GE, KitchenAid, Maytag, Frigidaire, Wolf, Viking, and Thermador units so the fix lasts.
Don't cook around a broken oven or a burner that won't light. Book online in under a minute, or call (858) 377-6959 to talk to a real person any time, day or night. With a 4.9-star rating from 500-plus Google reviews, licensed and insured technicians, and a 90-day warranty on every repair, getting your kitchen back is easier than you think.
Broken? We're on it.
Book a certified technician now, or call us 24/7. Same-day service across San Diego & Orange County.